安装Running a MacOS Ventura VM in ProxMox VE

💡 NOTE: MacOS higher than version 12 requires a CPU with AVX2 instruction support

1. Download a MacOS Ventura .iso Download OR create your own https://youtu.be/JFMvUpdCMwo
2. Download KVM OpenCore bootloader Download
3. Extract the downloaded KVM OpenCore bootloader .gz file
4. Upload the Ventura and KVM OpenCore .iso files to the Proxmox ISO library
5. Log into the ProxMox web UI
6. Right click the ProxMox node name > Create VM
7. Type MacOSVentura in the name field, set the VM ID to 1300 (unless 1300 is in use) > Next
8. On the OS tab, set the Type field to Other and select the KVM OpenCore .iso in the ISO Image field > Next
9. On the System tab, set the Graphic card field to VMware compatible, BIOS field to OVMF (UEFI), Uncheck the Pre-Enroll Keys checkbox, Check the Add EFI Disk checkbox, Machine field to q35 and the SCSI Controller to VirtIO SCSI > Next
10. On the Hard Disk tab, set the Bus/Device field to VirtIO Block, Disk size field to 64, Cache field to Write back (unsafe) > Next
11. On the CPU tab, set Cores field to 4, Type field to host > Next
12. On the Memory tab, set the Memory to 4096 > Next
13. On the Network tab, set the Model field to VMware vmxnet3 > Next
14. Verify the summary and click Finish
15. Click the MacOSVentura VM > Select Hardware from the left sub-navigation menu
16. Click Add > CD/DVD Drive
17. Select the MacOS Ventura .iso downloaded earlier > Click Create
18. Select the MacOSVentura VM > Options > Boot Order
19. Set the KVM OpenCore disk as the first boot option > Click OK
20. Right click the ProxMox node name > Console
21. Run the following commands in the terminal
    # edit the VM conf file, change 1300 to the VM ID for the MacOSVentura VM
    nano /etc/pve/qemu-server/1300.conf
22. If running on an Intel CPU, add the following line to the bottom of the .conf file:

    args: -device isa-applesmc,osk="ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" -smbios type=2 -device usb-kbd,bus=ehci.0,port=2 -global nec-usb-xhci.msi=off -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off -cpu host,vendor=GenuineIntel,+invtsc,+hypervisor,kvm=on,vmware-cpuid-freq=on

23. If running on an AMD CPU, add the following line to the bottom of the .conf file:

    args: -device isa-applesmc,osk="ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" -smbios type=2 -device usb-kbd,bus=ehci.0,port=2 -global nec-usb-xhci.msi=off -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off -cpu Haswell-noTSX,vendor=GenuineIntel,+invtsc,+hypervisor,kvm=on,vmware-cpuid-freq=on

24. Press CTRL+W and search for ,media=cdrom
25. Delete the ,media=cdrom from the two attached .iso files (KVM OpenCore and Ventura) and add cache=unsafe
26. Press CTRL+O, Enter, CTRL+X to write the changes to the conf file
27. Back in the Proxmox web UI, right click the MacOSVentura VM in the left navigation pane > Start
28. Click console in the left sub-navigation menu
29. At the OpenCore menu, select UEFI Shell > Press Enter
30. Type the following in the UEFI shell:
    # change to the Ventura.iso, the disk number may be different for you
    fs0:
    # launch the MacOS installer
    System\Library\CoreServices\boot.efi
31. After a long initialization sequence the MAC OS Setup should start
32. Select Disk Utility
33. Select the VIRTIO Block Media > Click Erase
34. Name the drive MacOS > Set the Format to APFS > Click Erase
35. Click Done > Close Disk Utility
36. Click Install macOS Ventura
37. Click Continue > Click Agree > Click Agree again
38. Select the MacOS disk > Click Install
39. Wait while Mac OS installs files, the VM will reboot several times
40. Select your Country > Click Continue
41. Confirm your languages and keyboard layout > Click Continue
42. Click Not Now on the Accessibility screen
43. Click Continue on the Data & Privacy screen
44. Select Not Now on the Migration Assistant screen
45. Select Set Up Later and then Skip on the Apple ID screen
46. Click Agree > Agree again
47. Enter a name, user name, password > Click Continue
48. Click Continue > Select Use or Don't Use for Location Services
49. Pick a timezone > Click Continue
50. Uncheck Share Mac Analytics with Apple > Click Continue
51. Click Set Up Later on the Screen Time screen
52. Uncheck the Enable Ask Siri box > Click Continue
53. Pick a theme > Click Continue
54. Welcome to MacOS 13 Ventura

Configuring Booting Without OpenCore Mounted

1. Log into the MacOSVentura VM
2. Launch a web browser and download the KVM OpenCore EFI folder Download
3. Download MountEFI from GitHub Download
4. Start LaunchPad from the dock
5. Search terminal > Click Terminal to launch it
6. Run the following commands in the terminal window
   cd ~/Downloads/MountEFI
   chmod +x MountEFI.command
   ./MountEFI.command
7. Enter the number that corresponds to the MacOS drive created during the installation > Press Enter
8. Open a Finder window
9. Navigate to the mounted EFI location
10. If an existing EFI folder exists, rename the it to EFI.orig
11. Copy the KVM OpenCoreEFI folder downloaded earlier to the mounted EFI partition
12. Once the EFI folder is copied, shutdown the VM
13. Click the MacOSVentura VM > Select Hardware from the left sub-navigation menu
14. Click the OpenCore Hard Disk to select it > Click Detach
15. Click the detached OpenCore Hard Disk to select it again > Click Remove
16. Right click the MacOSVentura VM in the left navigation pane > Start
17. Click console in the left sub-navigation menu to verify the VM still boots into Ventura without the OpenCore disc image mounted