安装Run Ubuntu 12.04 on Ouya

NOTE: None of the slowness/delays have been edited out of the Linux footage so you can see first hand what the Linux experience was like running on the Ouya

Things You Will Need

• A USB flash drive, at least 4 GB of free space https://amzn.to/3wkR5ju
• A USB hub, preferably with external power https://amzn.to/3KTviDw
• A USB keyboard https://amzn.to/3qgUQTe | https://amzn.to/3uchJs

Prerequisites and Downloads

1. Download Ubuntu 12.04 files Download
2. Download win32diskimager Download
3. Download i12bretro_OUYA_Ubuntu_commands.zip Download
4. Extract Ubuntu 12.04 files
5. Extract the downloaded i12bretro_OUYA_Ubuntu_commands.zip
6. Extract win32diskimager
7. Launch win32diskimager
8. Navigate to the extracted Ubuntu files and select the .img file
9. Select and then double and triple check the correct device is selected from the dropdown

   All data will be lost, check the selected device one more time

10. Click the Write button
11. Ignore prompts to format the drive
12. Safely remove the flash drive
13. Plug the flash drive, keyboard and mouse in the USB hub
14. Plug the USB hub into the Ouya

Installing Ouya USB Drivers

1. Right click Start > Command Prompt (Admin)
2. Paste the following commands to disable driving signing checks temporarily
   bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
   bcdedit -set TESTSIGNING ON
   shutdown /r
3. Your PC will reboot
4. Connect a USB cable from the micro USB port on the back of the Ouya to your PC
5. Connect the USB hub to the USB port on the Ouya > Plug in the USB keyboard and prepared USB flash drive
6. Make sure the Ouya is connected to a display via HDMI
7. Power on the Ouya
8. After a few seconds you should hear Windows chime that a new device has been detected
9. Right click Start > Device Manager
10. Expand Other Devices and you should see OUYA listed
11. Right click OUYA > Update Driver
12. Select Browse my computer for driver software
13. Click the Browse... button
14. Navigate to the extracted i12bretro_OUYA_Ubuntu_commands\files\driver
15. Click OK
16. Make sure "Include subfolders" is checked, click Next
17. Windows should find the correct driver for the Ouya and install it
18. Navigate to the i12bretro_OUYA_Ubuntu_commands in windows explorer
19. Right click i12bretro_OUYA_Ubuntu_commands.bat > Run as administrator
20. The script uses the Android Debug Bridge (ADB) to boot the Ouya into recovery
21. When the command prompts to "-- Setup the fastboot driver", go back to Device Manager expand Android Device
22. Right click Android Bootloader Device > Update Driver
23. Select Browse my computer for driver software
24. Click the Browse... button
25. Navigate to the extracted i12bretro_OUYA_Ubuntu_commands\files\driver
26. Click OK
27. Make sure "Include subfolders" is checked, click Next
28. Windows should find the correct driver for the Ouya and install it
29. Press Enter at the command prompt once the driver is installed to continue
30. The script will run another ADB command to push a custom zImage kernel to the Ouya
31. The Ouya should boot Ubuntu 12.04 from the USB
32. Default logins are as follows:

    root/123456
    developer/ouya

Configure Ubuntu

1. Change the root and developer passwords by running the commands below, replacing the passwords with something secure
   sudo passwd developer
   sudo passwd root
2. Configure wireless networking by modifying /etc/network/interfaces
3. To return to the Ouya OS simply reboot from the Ubuntu interface

There are instructions included in the Ubuntu download to dual boot the Ouya with Ubuntu and Android. I did not test this option, but beware the dual boot option has the potential to brick your device. The fastboot option demonstrated in the video poses very little risk to your console. For further reading and history on this check out http://tuomas.kulve.fi/blog/2013/09/12/debian-on-ouya-all-systems-go/.

Cleaning Up

1. To restore driver integrity checks, do the following:
2. Right click Start > Command Prompt (Admin)
3. Paste the following commands to re-enable driving signing checks
   bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS
   bcdedit -set TESTSIGNING OFF
   shutdown /r
4. Your PC will reboot